Engineering College
Answers
Answer 1
The work done by a 10 HP motor when it raises a 1000 Newton weight at a vertical distance of 5 meters is 5kJ.
Define work. Explain the rate of doing work.
Work is the energy that is moved to or from an item by applying force along a displacement in physics. For a constant force acting in the same direction as the motion, work is easiest expressed as the product of force magnitude and distance traveled.
Since the force transfers one unit of energy for every unit of work it performs, the rate at which work is done and energy is used are equal.
Solution Explained:
Given,
Weight = 1000N and distance = 5m
A/Q, the work here is done in lifting then
Work = (weight) × (distance moved)
= 1000 X 5
= 5000Nm or 5000J = 5kJ
Therefore, the work done in lifting a 1000 Newton weight at a vertical distance of 5 meters is 5kJ.
To learn more about work, use the link given
https://brainly.com/question/25573309
#SPJ9
Related Questions
after an annual inspection has been completed and the aircraft has been returned to service, an appropriate notation should be made
Answers
The correct answer is an appropriate notation should be made in the aircraft maintenance records.
Airplane maintenance records include: The total time in service of the airframe and the status of the life-limited parts of the airframe. The time since the last overhaul of the items installed on the aircraft. The indication of the current inspection status of the aircraft, including the time since the last inspection.they serve as a written record of all the maintenance history that has occurred over the life of the aircraft. It also serves as part of the means needed to determine if an aircraft is current on all required maintenance, and if it is in an airworthy condition
To learn more about aircraft maintenance records click the link below:
brainly.com/question/14455845
#SPJ4
In the mesh created, you should have 1000 elements and 1111 nodes. How many values will Fluent have to determine directly by solving a system of algebraic equations? Please input answers as an integer (eg. 1, or 80, or 150, etc.)
Answers
The number of values that the Fluent will have when 1000 elements and 1111 nodes are created is 20
What will the number of values be?
Number of elements along x direction is m and along y direction is n.
So, m × n = 1000 ( Elements)
And m × n + m + n + 1 = 1111 (Nodes)
Or, m + n = 1000
If m = 100 then n = 10. These values satisfy both the equations.
Now, for each element there will be one velocity component, pressure or temperature. So, 1000 algebraic simultaneous equations will be there for each case.
Learn more about node on:
https://brainly.com/question/28064122
#SPJ1
the amount of heat required to evaporate the refrigerant in a cycle is 200 kj/min. the work supplied to the compressor is 50 kj/min. calculate the cop.
Answers
The COP is now worth around 1.34.Lower values of COP will be produced by lower cold space and greater warm space temperatures.
A freezer's COP is what?A deep freeze unit will be closer to 1.0 than a typical domestic refrigerator, which could have a coefficient of performance (COP) of around 2.5. Lower values of COP will be produced by lower cold space and greater warm space temperatures.The formula for calculating the coefficient of performance, or COP as it is more popularly known, is COP = ((T2)/(T2 - T1)), where T2 stands for the hot temperature and T1 for the cold temperature. These can also be, similarly: COP = heat ejected / (heat ejected - heat provided)In the absence of it, COP = 200 / (200 - 50) = 1.34As a result, the COP is worth around 1.34.
To learn more about COP refer to:
https://brainly.com/question/12950677
#SPJ4
Have you ever prototyped an idea? How did you do it?
Answers
Yes, I have prototyped an idea.
How to prototype an idea?
STEP-1 Create Your Ideas Now: Here are some initial steps you may take to speed up the idea-generation process. Conduct in-depth research Know the market value, potential rivals, manufacturing method, and overall cost of your goods.
STEP-2 Make a Simplified Version of Your Idea: Making a straightforward representation of your idea would be the next step after conducting considerable research and settling on an idea.
STEP-3 Make a Realistic Prototype: You actually start working on your prototype at this point.
STEP-4 Develop Your Prototype Until It Is Perfect: The hardest and longest phase of them all is this one.
Hence, the prototype of an idea is given.
To learn more about the Prototype from the given link
https://brainly.com/question/27896974
#SPJ9
size circualr clarifiers to settle the stream from the floccualtors ina water treatment plant. the water flow rate is 5.0 mgd, the design overflow rate is 725 gpd/ft2, and the hydraulic ressidence time is 4 hours.l should you use two clarifiers in parallel or more?
Answers
The correct answer is diameter of clarifier = 66.261 feet Image transcriptions Water Flow rate Hydraulic residence.
Hydraulic residence time. The HRT indicates the duration in hours that the feed solution remains in the MBR before it is processed as permeate by the membrane. The formula for HRT is. (5.1) From Eqn (5.1), it is evident that HRT depends on the hydraulic volume of the reactor and the permeate flow.So, for accurate HRT calculation, use the hydraulic retention time formula “HRT = V/Q.” Here, you are dividing the volume of the aeration tank, which is a value of meters cubed, by the influent flow rate.
To learn more about Hydraulic residence click the link below:
brainly.com/question/28559289
#SPJ4
an inventor claims to have developed a refrigerator that maintains the refrigerated space at 40f while operating in a room where the temperature is 80f and that has a cop of 13.5. is this claim reasonable?
Answers
The claim made by inventor is invalid. A fridge set to 37° F will keep food fresh for as long as possible, preventing the growth of bacteria in raw meats or ice crystals on greens.
In the freezer, keeping food completely frozen requires a temperature of 0°F. The Food and Drug Administration states that 40 degrees Fahrenheit or lower is the recommended refrigerator temperature (FDA). Salmonella, E. coli, and listeria, three bacteria that can result in foodborne diseases, cannot grow at these temperatures. The primary portion of the refrigerator should be no warmer than 40 degrees Fahrenheit. 37 degrees Fahrenheit is the ideal temperature for keeping food cold. Install a thermometer inside your refrigerator if you're unsure of the ideal temperature for one.
Learn more about degree here-
https://brainly.com/question/19393940
#SPJ4
Determine the line load for the water heater in this residence. Water heater (28 kVA)
Answers
The line load for the water heater in this residence is 117 A.
What is the current concept?
Electric current is the flow of electric charges caused by a potential difference. Electric current is the movement of electric charges, such as electrons, that occurs inside different materials, due to the application of a difference in electric potential.
The I is calculated as follows:
I = P/E
I = 28,000VA/240V
I=28,000A/240
I = 116.67A = 117A
Therefore, the value for I is calculated as 117A.
See more about current at brainly.com/question/14287268
#SPJ1
wt steel shape is produced by cutting a wide flange beam lengthwise in half. group of answer choices true false
Answers
It is true that wt steel shape is produced by cutting a wide flange beam lengthwise in half.
A beam is a structural component that resists loads mostly applied laterally to its axis (an element designed to carry primarily axial load would be a strut or column). Its primary method of deflection is bending. Reaction forces are produced at the beam's support points as a result of the loads placed on it.
As a result of all the forces operating on the beam, internal stresses, strains, and deflections of the beam are caused by shear forces and bending moments within the beams. Beams differ from one another in terms of how they are supported, their profile (the form of their cross-section), equilibrium circumstances, length, and material.
Beams are typically used to describe structural elements in buildings or civil engineering when the beams are horizontal and support vertical loads.
To know more about beam click here:
https://brainly.com/question/23818966
#SPJ4
Provide the type and assembly language instruction for the following binary value: 0000 0010 0001 0000 1000 0000 0010 0000two
Answers
Assembly is essentially binary code written in a way that people can read it. The assembler then converts the assembly code, line by line, to the corresponding bit code.
What is the difference between Assembly and binary?In essence, assembly is binary code that has been translated into a language that people can read. Then, the assembler takes the assembly code and converts it bit-by-bit to the corresponding bit code.Imagine that there is a table with a line for each potential assembly statement. The statement itself is next on each line, followed by the corresponding bits that the computer can understand on the right.Even so, assemblers also have supplementary features like macros and other features, but the aforementioned functionality is their primary functionality.Binary is just a numbering scheme to programmers. For instance, base2 contains some 0s and 1s. These binary numbers are used by all computers. They interpret the instructions as a list of these numbers. They are not affected by the human-generated code, which is typically produced using a high-level programming language like Python, Java, and others.It is obvious that machine instructions in computers are not really human-readable - most people cannot determine the operational difference between 100010001... and 010001000... by simply looking at a binary or hex representation of the instruction bytes. Simply put, these instructions are machine codes.For instance, in the x86-16 architecture, the following instruction is used as the machine code for loading a value into a register: With a 2-bit addressing mode field and a 3-bit base register, the formula 8B 0E 34 12 denotes mov r16, r/m16, and which register the destination is (in this case, CX). For the avoidance of doubt, the Machine Code is represented using HEX code. Actually, it is simple to translate it to binary, and you have already mentioned that it is "10001011000011100011010000010010. Just like a string of ASCII 0 and 1 but more condensed, HEX is a text serialization format for binary numbers.Such binray/HEX instructions are readable by humans thanks to assembly, which is a higher level programming language than machine code. Using the machine code 8B 0E 34 12 as an example, MOV CX, [1234H] would be the result of decoding and disassembling the code.
To Learn more about Assembly refer to:
https://brainly.com/question/1285060
#SPJ9
true or false: a riverbed with a shallow slope will yield high velocity streamflow. question 1 options: true false
Answers
The majority of U.S. Geological Survey (USGS) stream gages measure stage and are made up of a building that houses the equipment needed to measure, store, and transmit stream-stage data.
There are numerous ways to measure stage, often known as gage height. One such method involves placing a stilling well along a riverbank or on a bridge pier. Through underground pipelines, water from the river enters and exits the stilling well, allowing the water surface in the stilling well to be level with the water surface in the river. A float, pressure, optical, or acoustic sensor may be used to measure the stage inside the stilling well. An electronic data recorder automatically stores the observed stage value on a regular basis, typically every 15 minutes.
Learn more about stream gages and their stages here:
https://brainly.com/question/15966586
#SPJ4
Technician a says that the on-board diagnostics ii (obdii) system is designed to set fault codes if the vehicle exceeds the limits of the epa federal test procedure. Technician b says that the epa federal test procedure pass and fail points are the same for every vehicle. Who is correct?.
Answers
The EPA Federal Test Procedure, commonly known as FTP-75 for the city driving cycle, are a series of tests defined by the US Environmental Protection Agency (EPA).
What is federal test procedure?
Due to the running loss emission test's omission during the two-day "Short" diurnal test cycle, the purge volume is decreased by approximately 30%.
Canister working capacity will be higher in vehicles with higher purge air rates during the recommended driving cycles. If the purge air volume is raised, a carbon canister's operating capacity can also be enhanced .
It is used to measure tailpipe emissions and fuel economy of passenger cars (excluding light trucks and heavy-duty vehicles).
Therefore, The EPA Federal Test Procedure, commonly known as FTP-75 for the city driving cycle, are a series of tests defined by the US Environmental Protection Agency (EPA).
To learn more about EPA, refer to the link:
https://brainly.com/question/2459922
#SPJ1
a transformer is connected as a step-up transformer with a 15:1 turns ratio. if the primary voltage is 30 v, what is the voltage of the secondary?
Answers
The correct answer is the secondary voltage will be 120*5 = 600V transformer.
A transformer is an electrical apparatus that manipulates the level of voltage flowing through any point in a power grid. In a distribution system, the transformer decreases the voltage traveling through power lines to a level more suitable for residential and commercial use.An electrical device that can change the A.C. current is known as a transformer. Principle – A transformer works on the principle of mutual induction. Mutual induction is the phenomenon by which when the amount of magnetic flux linked with a coil changes, an E.M.F. is induced in the neighboring coil.
To learn more about transformer click the link below:
brainly.com/question/15200241
#SPJ4
what is true? question 5 options: a) vortex line has a variable strength b) vortex line has a constant strength c) vortex line has a variable strength
Answers
Option b is true. It is true that the vortex line has a constant strength. It is a vortex of constant strength that acts along the whole length of the line.
The line vortex, which describes a line's passage through three-dimensional space in the case of propeller technology, is a vortex of constant strength that acts along the whole length of the line. Helmholtz, a German mathematician, physicist, and physician, discovered several fundamental rules for the behavior of inviscid vortices with relation to vortex filaments. These rules have come to be known as Helmholtz's vortex theorems.
1. A vortex filament's strength remains constant throughout its length.
2. In a fluid, a vortex filament cannot come to an end. As a result, the vortex must reach the fluid's boundary, which may be at, or else the vortex filament must create a closed channel inside the fluid.
To know more about vortex click here:
https://brainly.com/question/29263834
#SPJ4
A light bulb has a normally distributed light output with mean 5,000 end foot-candles and
standard deviation of 50 end foot-candles. Find a lower specification limit such that only
0.5% of the bulbs will not exceed this limit.
Answers
The specification limit where 0.5% of the bulbs will not exceed the limit of the standard deviation is given as: 4,871.50. This is computed using the z-table/ z-score.
What is a specification limit?
Customer specification limits are the objectives set for a product or process based on customer or market performance; the Voice of the Customer is frequently used as input for customer specification limits. In other words, we measure the desired outcome of the metric.
To compute the above we say:
From the z-table, a z-score of -2.57 cuts off 0.005 in the left tail;
Given the formula for z-score = (x-μ)/σ
Where
Z = Standard Score
x = observed value
μ = Mean of the sample; and
σ = Standard deviation of the sample
We have:
(x-5000)/50 = -2.57
Solving for x we get:
x-5000=-128.5
x = -128.5+5000
x = 4871.50
Learn more about specification limits:
https://brainly.com/question/29023805
#SPJ1
a 1/40 airplane model is tested in a wind tunnel at full velocity and temperature. what is the approximate ratio of wind tunnel pressure to normal ambient pressure?
Answers
In wind tunnel tests, low-pressure differential readings in the range of 1.0-120 Pa, spanning speeds of 3 to 10 m/s at angles of attack of 20 to +25, were fully functional.
How is wind pressure determined?
To calculate the wind pressure on a structure, use the formula below: q = K x V2 = coefficient of exposure x fundamental wind speed c fundamental wind speed. Although the train moves a lot of air, it cannot escape the tunnel quickly enough. Pressure increases as a result. Commonly used to express pressure readings is the unit of psi, which can be either imperial or English. It stands for pounds per square inch and is equivalent to about 6890 Pascals. The speed of the wind and atmospheric pressure are closely correlated. The pressure gradient is steeper and the wind speed is larger the bigger the difference in air pressure between the two places. slower is the pressure gradient the softer
To learn more about pressure determined refer to
https://brainly.com/question/15127695
#SPJ4
what should the attack team do if they open the door to a structure and observe a low neutral plane and turbulent smoke?
Answers
Apply water to the hot gas layer, but stay outside the structure.
What is positive pressure ventilation fire fighting?A coordinated fire strike called a Positive Pressure Attack (PPA) makes use of fans to help put out the flames.After a fire has been put out, positive pressure ventilation (PPV) uses fans to exhaust the combustion byproducts.For interior crews, fighting fire is significantly less important than fighting smoke in a successful and safe fire attack.Positive Pressure Attack (PPA) benefits victims who may be in regions where they can survive upon our arrival as well as firemen who are not in obstructed, combustible, or carcinogenic settings.The exhaust is most important for the effectiveness of PPA even though many different factors (fan size, setback distance, angle, intake, exhaust, etc.) can alter the pressures created by a fan.
To learn more about Positive Pressure Attack refer,
https://brainly.com/question/28147152
#SPJ4
The attack team need to Apply water to the hot gas layer, but stay outside the structure if they saw a low neutral plane and turbulent smoke
What is the job of firefighter?The goal of the demanding profession of firefighting is to save and rescue people, animals, and property from fires and other dangerous situations. Firefighters manage dangerous situations as skilled experts while preserving lives.They also respond to and help people in situations involving accidents and natural disasters like landslides, landslides, earthquakes, storms, and floods. Three ingredients are required for a fire to burn: fuel, oxygen, and heat. The flaming triangle is a common name for this. The goal of combating a fire is to rob it of at least one of those components. The most common method for doing this is dousing the fire with water, but some fires also call for the use of foam or dry agents.
To learn more about firefighter refer :
https://brainly.com/question/19556071
#SPJ4
g you are designing a concrete mixture for a concrete wall that requires a compressive strength of 5700 psi. the system requires no air entrainment, but is wet continuously. what is the appropriate water to cementitious materials ratio that should be used in this mixture?
Answers
One-fifth the narrowest dimension between the sides of forms, bundles of bars, prestressing tendons, or prestressing ducts should be the maximum size of coarse aggregate.
Concrete mix proportioning, also known as mix design, is a procedure that entails two linked steps: (1) choosing the appropriate materials, and (2) figuring out their relative ratios to make concrete with the right workability, strength, and durability as economically as feasible. The 1:2:4 ratio is used to blend the three essential components of this concrete, which are concrete, sand, and aggregate. This results in concrete of average strength. Depending on the qualities of the cement and the local weather at the concrete site, it can take anywhere from 30 to 90 minutes to set.
Learn more about concrete here-
https://brainly.com/question/29616967
#SPJ4
1. The amount of friction developed between two
moving parts depends on all of the following factors,
except:
(A) the type of material.
(B) surface finish.
(C) pressure between moving parts.
(D) color pigment found in the parts.
Answers
The amount of friction developed between two moving parts depends on all of the following factors, except the color pigment found in the parts.
What is friction?
The force that stops solid surfaces, fluid layers, and material elements from sliding against one another is known as friction. There are various kinds of friction: Dry friction is the force that opposes the relative lateral motion of two in touch solid surfaces. Dry friction is classified as static friction between stationary surfaces and kinetic friction between moving surfaces. Dry friction, with the exception of atom or molecular friction, is caused by the interaction of surface characteristics known as asperities. Fluid friction is the friction that occurs between moving layers of a viscous fluid.
To learn more about friction
https://brainly.com/question/15122221
#SPJ1
From the list of problems below, check all that are known to be NP-complete. You do not need to justify your answer. (Set cover) Given a graphGand an integerk, find a set of verticesUof size at mostksuch that every edge is adjacent to at least one vertex inU. (Max SAT) Given a CNF formula and an integer g, find a truth assignment that satisfies at leastgclauses. (Linear programming) Given am×nmatrixA, and vectorsb∈Rm,c∈Rn, find the solution of maxcTxs.t.Ax≤bx≥0(MST) Given an undirected, weighted graphG=(V,E)find a minimum spanning tree ofG, or outputs FALSE if such tree does not exist.
Answers
Any computing issue that falls within the category of NP-complete problem has yet to find an effective solution algorithm.
Which problems are NP-complete?Any of a family of computer problems that have no effective solution algorithm are referred to as NP-complete issues. The traveling salesman problem, satisfiability issues, and graph-covering issues are only a few examples of the significant computer science issues that fall under this category.The difficulty of NP and NP-Complete issues is equal. If a problem is included in both NP and NP-Hard Problems, it is said to be NP-Complete. This statement, "This problem can change into an NP-complete problem on a non-deterministic Turing machine," is untrue for the obvious reason that while any problem in P is also a problem in NP, no problem in P is an NP-complete problem (unless P=NP, of course). If P is an NP problem and all NP problems convert into NP-complete problems, then P must also undergo this transformation.
To learn more about NP-complete problem refer to:
https://brainly.com/question/17218056
#SPJ4
assume the skin friction drag on the airfoil is essentially that for a flat plate with the boundary layer being laminar and incompressible. what percentage of the total drag is due to skin friction?
Answers
Preliminary studies found that skin friction drag accounts for between 20 to 40% of overall drag.
Explain about the skin friction?
Aerodynamic drag, which is a resistive force applied to an object moving in a fluid, includes skin friction drag.
The viscosity of a fluid as it passes across a surface is what creates skin friction. Its size is determined by the fluid's viscosity, the amount of wetted (or total) surface area in contact with it, and the degree of roughness of the surface.
Skin friction is important because it plays a role in the erosion of sediment particles from the water-bed boundary condition. Regarding the vertical mixing of the sediment over the water depth, form drag-related turbulence (separation-induced eddies, etc.) is significant.
To learn more about skin friction refer to:
https://brainly.com/question/14174373
#SPJ4
A five star hotel has a very high grand ceiling with intricate carvings on it. As people enter the hotel and look at the ceiling, they see a huge chandelier whose lights enhance the carvings on the ceiling. Which structural element is preventing the chandelier from causing cracks on the roof?.
Answers
The plate structural element is preventing the chandelier from causing cracks on the roof.
Structure elements of buildings refer to those elements which provide certain support to the design and survival of the building. Plate structural element is one such element that is used in construction.
Based on the given scenario in the statement, where a five-star hotel is designed with a very high grand ceiling with intricate carvings. Upon entering the hotel, people look at the ceiling and find huge chandelier lights enhancing the carvings on the ceiling. The plate structural element is used on the ceiling that prevents the chandelier from causing cracks on the roof.
You can learn more about structural elements at
https://brainly.com/question/26901483
#SPJ4
Circuit swtiching requires what type of channel, which means it is assigned exclusively to one call for the duration of the connection and cannot be used by another phone call?.
Answers
The network in which users who are calling and being called first establish a dedicated channel (or circuit) between them.
The network in which users who are calling and being called first establish a dedicated channel (or circuit) between them. The channel is also only accessible to users while the connection is live. Since it allows for the availability of links, wires, or frequencies between system users for each call, the telephone system serves as the standard illustration of a circuit switched network. Two channels are designated for full-duplex communication while one channel is set up for half-duplex communication. The circuit switching network is primarily responsible for handling voice communication, which calls for real-time services with little to no delay. The only time the network requires a call setup delay is before a conversation. Due to network congestion or overload, calls may be blocked or dropped.
Learn more about network here:
https://brainly.com/question/28320459
#SPJ4
how to fix your headset if you can only hear out of one side logitech - g935 wireless 7.1 surround sound over-the-ear gaming headset for pc with lightsync rgb lighting - black/blue
Answers
Right-click the speaker or headphone icon in Windows and select Open Sound Settings. Under Related Settings, select Sound Control Panel.
How do I pair my gaming headset from Logitech?For five seconds, slide the switch to the off position before sliding it back to Bluetooth mode. 2. Hold down the "Volume Up" and "Track Forward" buttons while pressing and holding them down until the connection LED begins to blink quickly. Now, while searching for Bluetooth devices, your headset ought to show up.The RGB gaming headset has cutting-edge 7.1 surround sound that enhances the sound design of your game for accurate positional audio. Listen to everything as though you were in the center of it all with realistic acoustics.The RGB can indeed be disabled. The quickest method is to use the headset's buttons; the second button from the bottom should be used. You may also use Logitech's G-Hub to switch it off with a computer.
To learn more about Windows refer to
https://brainly.com/question/1594289
#SPJ4
Suppose a pv farm requires 2,000 panels to generate power at 40% efficiency. If a new panel were invented that was 50% efficient, how many panels would be required?.
Answers
The number of panels that will be required is 1600 panels.
How to calculate the number of panels?
From the information, we have:
2000 - 40% efficient panels
Now let each panel generate power = P
Hence, with 2000 panel we have 2000P.
Now, these are 40% efficient so
40% of incident power = 2000P
Incident power = 5000P
Power used by 1 panel = 5000P/2000 = 2.5P
Now we have 50% efficient panel and we have to generate 2000P,
Now 50 % of incident radiation = 2000P
Incident radiation = 4000P
Now no. of panel needed will be:
= 4000P/2.5P
= 1600
Learn more about power on:
https://brainly.com/question/1634438
#SPJ1
a floor can be dented by the application of too much stress. who is more likely to dent your floor: a 50 kg woman in high-heeled shoes (assume a 6.0-mm-diameter heel) standing on one heel or a 5000 kg african elephant (40-cm-diameter foot pads) standing on all four legs?
Answers
The correct answer will be: (A) 24955495.07 N/m² (B) 97482.40 N/m². Assuming the high heels carry half of the body weight, each high heel bears a quarter of the weight.
This demonstrates that the stress under the heels of high-heel shoes is roughly 60 times greater than that under flat shoes. A normal adult elephant weighs around 5000 kg and has feet that are around in area. The pressure an elephant's foot puts on the ground is significantly less than what high heel shoes put on the ground.
The values are as follows:
mass,
m = 50 kg
diameter
= 0.50 cm
then,
radius,
r = 0.25 cm
= 0.0025 m
Learn more about pressure here-
https://brainly.com/question/16889220
#SPJ4
Select all of the following strokes from the actual four-stroke spark-ignition cycle that are not included in the ideal Otto cycle.IntakeCompressionPower (expansion)Exhaust
Answers
The Intake and Exhaust ( The ideal Otto cycle is a closed system, so there is no intake or exhaust).
What do you mean by a closed system?
Closed systems make use of processing machinery that keeps a product out of contact with the outside world. They enable the passage of materials through a system along predetermined control paths.
Validating closed systems can stop unneeded material exchange between the process and the environment. Sewing machines, watches, clocks, and electric hair straighteners are a few examples of closed systems.
To learn more about a closed system, use the link given
https://brainly.com/question/17924509
#SPJ4
During this experiment, it was important to keep some parameters constant so we can compare the efficiency of different alcohols. Which one of the parameter was not constant?.
Answers
The purification of a wide range of materials involves the use of distillation, a significant commercial procedure.
The purification of a wide range of materials involves the use of distillation, a significant commercial procedure. However, it would definitely be helpful to clarify the terms that describe the procedure and related qualities before we start a discussion of distillation.
Although you may be familiar with several of these terms, you might not be aware of their precise definitions. Let's start by outlining the procedure for changing a material from its condensed phase to its gas phase. This process is known as sublimation for solids and vaporization for liquids. Both procedures call for heat.
To know more about distillation click here:
https://brainly.com/question/29037176
#SPJ4
which type of drawing commonly describes hydraulic and pneumatic circuits electrical power and fluid flow
Answers
The type of drawing commonly describes hydraulic and pneumatic circuits electrical power and fluid flow is fluid power.
The technologies of hydraulics and pneumatics are referred to as fluid power. Both systems transfer electricity from one place to another using a fluid (liquid or gas). In pneumatics, the fluid is a gas, whereas in hydraulics, the fluid power is typically a liquid (oil) (usually compressed air).
Both are methods of power transmission, which is the science of transforming energy into a form that is more usable and transferring it to the locations where it is required. Electrical, mechanical, and hydraulic power are the three most popular ways to transmit power.
Although they are occasionally seen as rival technologies, there is no one type of power transmission that is ideal for all uses. In actuality, a variety of technologies are used to suit the majority of applications. However, compared to other methods, fluid power has several significant advantages.
To know more about fluid power click here:
https://brainly.com/question/12947998
#SPJ4
A vehicle can hydroplane in speeds as low as __ mph.
Answers
Answer:35
Explanation:
which material/beam tested showed the least deflection? a. aluminum beam a (0.5 x 0.5) b. aluminum beam b (0.25 x 0.5) c. steel beam d (0.5 x 0.5) d. aluminum beam c (0.5 x 0.25)
Answers
Option c is correct. The steel beam d (0.5 x 0.5) tested showed the least deflection. Beam deflection refers to the state in which a beam has changed from its initial shape as a result of a force, load, or weight.
Beam deflection refers to the state in which a beam has changed from its initial shape as a result of a force, load, or weight. Obtaining equations that allow us to accurately calculate beam deflections in a variety of real-world situations is one of the most significant uses of beam deflection. Analysis of statically indeterminate beams also takes into account deflections.
In terms of structural engineering, deflection is the movement of a beam or node from its initial position as a result of loads and forces acting on the member. It is also referred to as displacement and can result from externally applied loads as well as from the structure's own weight and the force of gravity that applies to it.
To know more about beam deflections click here:
https://brainly.com/question/24230357
#SPJ4
Other Questions
{Question 20} Please help! Need by tonight! Thanks :) Which statement accurately describes the atoms of a specific element? is china's one child policy good idea or bad idea What 3x+6=21 will mark brainliest Anita is a top manager at z-tech. She has the formal authority to control and use z-tech resources because of her hierarchical position in the firm. Given only this information, what type of power can we say anita has?. A 1984 study by ulrich found that when post-operative hospital patients were in a ______ treatment group, they were discharged from the hospital more quickly and reported less pain. Luigi uses 39 mozzarella pearls (small cheese balls) for every 6 pizzas they make.Complete the table using equivalent ratios.Pearls3913Pizzas64 the client has the following arterial blood results: ph 7.12; hco3 22 meq/l; pco2 65 mm/hg; po2 52 mm/hg. the nurse correlates these values to which clinical situation? Two friends, Karen and Jodi, work different shifts for the same ambulance service. They wonder if the different shifts average different numbers of calls. Looking at past records, Karen determines from a random sample of 37 shifts that she had a mean of 4.5 calls per shift. She knows that the population standard deviation for her shift is 1.1 calls. Jodi calculates from a random sample of 32 shifts that her mean was 5.3 calls per shift. She knows that the population standard deviation for her shift is 1.5 calls. Test the claim that there is a difference between the mean numbers of calls for the two shifts at the 0.05 level of significance. Let Karen's shifts be Population 1 and let Jodi's shifts be Population 2. Step 2 of 3 : Compute the value of the test statistic. Round your answer to two decimal places psychologists say that in the preschool classroom, the key to keeping children race schemas from developing into racism is for teachers to Robert Owen's utopian society promoted this idea to allow workers to receive the full value of their labor.a. fascismb. communitarianismc. capitalismd. Marxism What is the difference between the Haversian Canals and the Canaliculi? which of the functions below would not be applicable to the sympathetic nervous system? question 21 options: 1) dilation of the airway passages 2) constriction of the blood vessels of the skin 3) increase in metabolic rate 4) pupillary constriction Add. State answer in simplest form. 1/3x + 5/7y question 1 the data collected for an analysis project has just been cleaned. what are the next steps for a data analyst? select all that apply. aiden carter, an administrator at an automobile company, has started to work overtime since the day he got promoted to the position of administrator. in addition to extra work hours, aiden also has to handle complaints on the human resource front. despite his honest work and transparent conduct, he is viewed as being unethical by many of his subordinates. in this scenario, aiden is likely: A development psychologist is interviewing teenagers whose parents are somali refugees who settled in minneapolis at least ten years ago. Her particular focus is how these parents support academic achievement. In this example, the researcher is looking at which level of a developmental framework?. 1. Read the paragraph, then answer the question that follows it.Question(1)Getting rid of the eyesores in a neighborhood does more than simply beautify; it can improve the economic and social life of an area. (2)Not long ago, a neighborhood in Philadelphia decided to improve its appearance by planting a community garden and installing trash cans. (3)As a result, neighbors spent more time together outdoors. (4)Thus graffiti writers and more serious offenders were discouraged from frequenting the area. (5)The cleaner streets and safer atmosphere also attracted more customers to local businesses. (6)Additional police on the streets also keep streets safer.Which sentence does not support the authors conclusion that getting rid of community eyesores can improve the local economic and social life?a. Sentence 3b. Sentence 4c. Sentence 5d. Sentence 6 What cosmetic procedure is not listed as one of the most popular cosmetic procedures?. The structure of the personality that deals with the demands of reality is called the.